Printheads; Printhead; Checking For Nozzle Clogging - Canon imagePROGRAF iPF6400S User Manual

Printhead

Printheads

Printheads
Printhead ................................................................................................................................................................................... 890

Checking for Nozzle Clogging ......................................................................................................................................... 890

Cleaning the Printhead ....................................................................................................................................................... 891
Replacing the Printhead ..................................................................................................................................................... 892
Printhead
Printhead
When purchasing, check the Model number.
• For instructions on replacing the Printhead, see "Replacing the Printhead."
Note
Checking for Nozzle Clogging Checking for Nozzle Clogging
If printing is faint or affected by banding in different colors, make sure the Printhead nozzles are clear by printing a test
pattern to check the nozzles.
• By default, nozzles are checked at fixed intervals.
Configure the settings on the Control Panel menu in Nozzle Check.
Note
(See "Menu Settings.")
Paper to Prepare
When Using Rolls
When Using Sheets
1
Load paper.
Loading Rolls on the Roll Holder
•
Loading Rolls in the Printer
•
Loading Sheets in the Feed Slot
•
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
890
Shape
P.634
➔
An unused roll at least 254.0 mm (10.00 in) wide
One sheet of unused paper of at least A4/Letter size
P.507
➔
P.509
➔
P.533
➔
).
Model number
PF-05
P.892
➔
iPF6400S
User's Guide