Specify Scaling, Enlarge/Reduce And Print - Canon imagePROGRAF iPF6400S User Manual

Specify Scaling, Enlarge/Reduce and Print

Specify Scaling, Enlarge/Reduce and Print

Specify Scaling, Enlarge/Reduce and Print
You can specify scaling to enlarge/reduce an image and print. This is useful when you wish to print an image at a spe-
cific size.
1
Display the Page Setup sheet.
2
Select the size of the media that you want to print in Paper Size.
•
•
Note
3
Select either Portrait or Landscape as the media orientation for the image in Orientation.
•
Note •
4
Click the Enlarged/Reduced Printing check box on.
•
Note
5
Select Scaling and input the scaling factor or drag the four corners of the image in the Preview display.
•
•
Note
•
6
Either drag the image on the Print Area Layout preview, or set the print position Layout.
7
Click the Print button.
Printing begins at the set scaling rate.
476
This is not displayed when a checkmark is placed in Borderless Printing.
Fit Roll Paper Widthis set in Enlarged/Reduced Printing.
When you select Portrait, the image on the media prints as it appears on the screen.
When you select Landscape, the image on the media prints rotated 90 degrees.
This is not displayed when a checkmark is placed in Borderless Printing.
You can specify scaling rate in intervals of 0.01%.
You can specify a range between 5.00-600.00%.
The size of the width and height proportionally grow when the image is enlarged/reduced.
iPF6400S
User's Guide