Canon imagePROGRAF iPF6400S User Manual page 355

iPF6400S
• D
Between Scans
You can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleeding or
color unevenness such as when bleeding occurs on a page or when color unevenness occurs during borderless
printing.
Setting Item
Printer Default
None
1 sec. / 3 sec. / 5 sec. / 7 sec. / 9 sec.
E
Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held
firmly against the Platen.
• F
Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
Setting Item
Printer Default
3 mm (0.12 in)
20 mm (0.8 in)
G
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic
cutting is used.
Setting Item
Printer Default
High Speed
Standard
Low Speed
H
Automatic Cutting
Set whether to perform roll cutting automatically or print a cut line.
The following settings are available for automatic cutting.
Setting Item
Printer Default
None
Print Cut Guideline
User's Guide
The setting of the control panel of the printer is applied.
The next line is printed immediately after a line is printed.
The next line is printed when the set time elapses after a line is printed.
* Increase the time according to the occurrence condition of bleeding or unevenness.
The setting of the control panel of the printer is applied.
The document is printed in the standard size.
* Select this when you do not have any problems in printing.
Select this when rubbing against the printhead occurs such as when using paper that tends to
curl.
The setting of the control panel of the printer is applied.
When the Standard setting does not result in a clean cut surface, select this.
Select this when you do not have any problems in automatic cutting.
This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select it
when using adhesive paper.
The setting of the control panel of the printer is applied.
After printing completes, the roll is not cut per page, and the next page of data is printed succes-
sively.
After printing completes, a line is printed per page, and the next page of data is printed succes-
sively.
Paper Detailed Settings Dialog Box
Details
Details
Details
Details
355