Canon imagePROGRAF iPF6400S User Manual page 536

Loading Sheets in the Feed Slot
4
Move the Width Guide (a) to match the size of paper loa-
ded.
Set the Width Guide against the edge of the paper to pre-
vent the paper from becoming crooked or wrinkled.
5
Press the OK button.
• If a print job was received
After the paper is advanced, the printer starts printing the print job.
• If no print job was received
The printer now starts feeding the paper.
Loading Heavyweight Sheets in the Front Paper Feed Slot
• Always load POP Board in the Front Paper Feed Slot for printing. Loading it in other ways may impair operation and damage
the printer.
Important
• One sheet of paper can be loaded at a time. Do not load multiple sheets. This may cause paper jams.
• Straighten paper if it is warped before loading it.
• Load the paper straight. Loading paper askew will cause an error. (See "Paper loaded askew..")
• Once you load the paper, you cannot shift it sideways. Load the paper straight.
• If paper other than POP Board is loaded in the Front Paper Feed Slot, you might not be able to shift the paper or pull it out
from the front.
• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
Note
Follow the steps below to perform loading procedures in a printer with no Spectrophotometer Unit (option).
536
iPF6400S
P.977
➔
User's Guide