Canon imagePROGRAF iPF6400S User Manual page 548

Using the Output Stacker
• The Output Stacker can stack paper that is up to 36 inches (914.4 mm) in length. However, performing color measurement
using the Spectrophotometer Unit (optional) should be performed using paper of length 730 mm or less.
Important
• The number of sheets that can fit in the Output Stacker is one sheet. When printing multiple pages, remove each sheet after
it is printed.
• Before printing banners or other long documents, tap the Output Stacker. We recommend that you spread a clean cloth or
paper on the floor and select Eject as the cutting method for rolls to prevent the printed surface from becoming dirty or
scratched. (See "Specifying the Cutting Method for Rolls.")
• If you perform high density printing on thin paper, the paper may become warped and might not stack correctly in the Output
Stacker. If this happens, use the Output Stacker folded up.
Use the Output Stacker in the regular position (a).
The stacker may also be used in the extended position (b) for some types of paper. To switch to the extended position,
move the Support Rod to position (b). The extended position enables easy removal after printing.
For information on types of paper you can use with the stacker in extended position, refer to the Paper Reference
Guide. (See "Types of Paper.")
548
P.496
➔
P.520
➔
iPF6400S
User's Guide