Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF6400S User Manual

Specifying the Cutting Method for Rolls

3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
Pages and
then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).")
P.354
➔

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Automatic The roll is automatically cut by the Cutter Unit following
printer driver settings.
Eject (when Select this to move the cutter by key operation and cut
the paper paper. Although there are cases with Automatic in
which the paper falls and the paper surface is scratch-
surface is
ed, you can avoid damaging the paper with this method
being
scratched / since you can cut by holding the paper with your hand
to wait for so that the paper does not fall when cutting. Also, since
you can cut while visually confirming the drying of the
ink to dry)
ink, you can avoid ejecting paper before the ink has
dried.
To cut the roll with the Cutter Unit, press the Cut but-
ton.
Manual Select this for paper that cannot be cut with the Cutter
Unit and for paper of which the leading edge curls
(when using
strongly and rubs the printhead.
media that
cannot be Use scissors to cut each document from the roll after
cut with the printing. For continuous printing (if you will cut each
page later), select Auto Cut > Yes or select Print Cut
Cutter Unit )
Guideline.
Paper cut- Choose this option if you want to cut pages by pressing
Cutter Unit buttons for manual cutting after printing
ting (to have
when Auto Cut > No is selected or Print Cut Guide-
the roll cut at
your speci- line is selected in the printer driver.
fied position) Otherwise choose this option if you want to cut the roll
edge after loading a roll.
520
D B
Between Scans in Drying Time, and
Cutting Method
C
Between
Printer Setting
Media Automatic
Menu > Pa-
per Details
Eject
> (Various
Types of
Paper) >
Cutting
Mode
Manual
Cut button Yes
pressed
iPF6400S
Driver Setting
Auto Cut Yes
(See "Cut-
ting Roll Pa-
Yes
per After
Print-
ing.")
P.155
➔
No, Yes, Print
Cut Guideline
No, Print Cut
Guideline
User's Guide