Canon imagePROGRAF iPF6400S User Manual page 76

Resizing Originals by Entering a Scaling Value (Mac OS)
9
Access the Page Setup pane.
10
Select and click a roll paper in the
11
Select the paper width of the roll loaded in the printer for
selected.
12
Make sure the
nal size as selected in
tributes dialog box—in this case, ISO A4.
13
D
Select the
14
G
Click Scaling and enter 120.
•
Note
•
15
Confirm the print settings, and then click
•
Note
76
A
Paper Source list.
C
Page Size setting matches the origi-
C
Paper Size in the Page At-
Enlarged/Reduced Printing check box.
You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the paper will
not be printed.
If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the upper-
left corner. In this case, you can center originals by selecting the
For tips on confirming print settings, see "Confirming Print Settings ."
B
Roll Width. In this case, ISO A2/A3 (420.0mm) is
J
M
Print to start printing.
Print Centered check box.
P.349
➔
iPF6400S
User's Guide