Canon imagePROGRAF iPF6400S User Manual page 97

iPF6400S
9
Select the print target in the
• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touches
printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut, depending
Important
on frequency of use. In this kind of situation, change the ink drying time in Between Pages in the Paper Detailed
Settings dialog box.
10
Access the Page Setup pane.
11
Select and click a roll paper in the
12
Select the paper width of the roll loaded in the printer for
ted.
13
C
Make sure the Page Size setting matches the origi-
nal size as selected in
tributes dialog box—in this case, ISO A4.
14
D
Select the Enlarged/Reduced Printing check box.
15
H
Select the Borderless Printing check box.
This ensures that
16
Confirm the print settings, and then click
• For tips on confirming print settings, see "Confirming Print Settings ."
Note
User's Guide
E
Print Target list.
A
Paper Source list.
C
Paper Size in the Page At-
F
Fit Roll Paper Width is automatically selected in
M
Print to start printing.
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
B
Roll Width. In this case, 10 in. (254.0mm) is selec-
D
Enlarged/Reduced Printing.
P.349
➔
97