Table of Contents
Advertisement
Chapter 3: Running Your First Scans
52
5. To monitor the progress of the assessment scan, right-click the group on the
navigation pane, select Properties from the pop-up menu, and then click Command
Jobs on the navigation pane.
Or click the Control jobs icon
Tip:
The assessment scan will not start until the discovery scan has finished.
Note:
The Command Jobs window appears and the ad hoc assessment scan appears in the
Command Jobs window along with the completed discovery scan.
6. To view statistics about the tasks in the job, select the Activity tab.
Details about the tasks appear in the Activity tab.
Figure 10: Task-level statistics for the linked ad hoc assessment scan
The task name appears under the Object column. The status starts out as
Tip:
Pending, may go back-and-forth between Idle and Processing until it finishes, and
then its status is Completed.
For more information about how scan jobs run and how to find information
Tip:
about them, see Chapter 10, "Monitoring Scans" on page 135.
7. After the job has finished, select the Analysis view, and then select the group.
on the toolbar.
IBM Internet Security Systems
Advertisement
Table of Contents
