Shutting Down Your Enterprise Scanner - IBM Proventia Network Enterprise Scanner User Manual

Shutting Down Your Enterprise Scanner

Introduction
When to use
Agent status
Procedure
IBM Proventia Network Enterprise Scanner User Guide, Version 1.3
You can shut down Enterprise Scanner from the Proventia Manager. The shut down
option also turns off the appliance.
If you have an agent with an early BIOS, the shut down command may not turn off
Note:
the appliance.
Use this option if you need to turn off the appliance temporarily and plan to continue
using the agent with the same SiteProtector. If you want to shut down the agent so that
you can register it with a different SiteProtector, see "Removing an Agent from
SiteProtector" on page 202.
In the SiteProtector Console, the agent continues to appear Online for a couple of hours. If
you do not restart the appliance within a couple of hours, the status of the agent becomes
Inactive. The agent goes through the normal statuses when you restart the appliance.
To shut down your agent:
1. Log on to the Proventia Manager for your agent. (See page 200.)
2. Select System on the navigation pane, and then click Management
It may take a while for Java to initialize the first time you do this.
Note:
3. Select System on the navigation pane, and then select Tools.
4. Click SHUT DOWN.
The application shuts down and the appliance is turned off.

Shutting Down Your Enterprise Scanner

→
Registration.
201