IBM Proventia Network Enterprise Scanner User Manual page 102

Chapter 7: Configuring Discovery and Assessment Policies
102
Column Description
Status A value indicating the development status of the check. Typically, the value is
released, meaning the check is considered ready for production use.
Target type A list identifying the types of targets (typically services) the check examines.
Example: An HTTP check would typically list both
Timeout The number of seconds the check is allowed to run before the check is
cancelled.
Default: If the value is 0, the default timeout (5 minutes/300 seconds) applies.
Vulnerability The vulnerability Tag Name for the vulnerability reported by the check.
Vulnerability ID An unsigned 32-bit integer identifier for the condition reported by the check,
equal to the SecCheckId of the SecurityChecks table entry (in the X-Force and
SiteProtector databases) that describes the condition. A condition identifies a
vulnerability, a missing patch, a policy violation, detected malware, or a
misconfiguration.
XPU added The Assessment Content XPU in which the check was added.
XPU updated The Assessment Content XPU in which the check was last updated.
Table 38: Check grouping definitions (Continued)
and .
http https
IBM Internet Security Systems