Logging On To The Siteprotector Console - IBM Proventia Network Enterprise Scanner User Manual

Chapter 2: Installing and Configuring an Agent

Logging On to the SiteProtector Console

Introduction
Requirement
Procedure
40
Use the SiteProtector Console to set up users and user groups, configure scans, and
monitor the protection status of your Site.
You must meet the following requirements to log on to the SiteProtector Console:
You must install the SiteProtector Console on your computer.
●
You must have a user ID and password for the SiteProtector system.
●
To log on to the SiteProtector Console:
1. Click Start on the taskbar, and then click All
→ →
Programs ISS SiteProtector
2. Do one of the following:
If the Site is already defined in the SiteProtector system, select it.
■
If the Site is not already defined in the SiteProtector system, right-click My Sites,
■
→
select New Site from the pop-up menu, and then type the IP address or the DNS
name of the Site in the Server box.
3. If you do not use the default port number (3998), type the port number of the Site
server to communicate with in the Port box.
4. Type your SiteProtector User name.
If your user name is part of a domain, use the following format:
Note:
domain_name\user_name
5. Type your Password.
6. Click OK.
The Site Manager appears.
→
Console.
IBM Internet Security Systems