IBM Proventia Network Enterprise Scanner User Manual page 36

Chapter 2: Installing and Configuring an Agent
Task 3: Editing the
local properties file
Task 4: Enabling
explicit-trust
authentication
36
2. Find the Certificate's subdirectory under this directory, and then find a file with the
extension.
.PEM
There should be only one file with this extension.
Note:
3. Copy this file (using FTP or an FTP application) to the following path on the agent:
/var/spool/crm/cacerts/
4. Rename the file as follows:
dccert.pem
To edit the local properties file:
1. On the agent, find the file named /etc/crm/rsPostLocalProperties.xml .
2. Open this file for editing, and then locate the setting parm name='aCertFile .
3. Set the value='' to value='/var/spool/crm/cacerts/dccert.pem' .
4. Save the file.
To enable explicit-trust authentication on the agent:
1. On the navigation pane in Proventia Manager, click System, and then click
→
Management Registration.
2. Select the Register with SiteProtector check box.
3. Either create a new Agent Manager configuration or open an existing one.
4. Select explicit-trust from the Authentication Level list.
5. Do one of the following:
To configure a new Agent Manager, complete the process as explained in
■
"Registering Enterprise Scanner to Connect to the SiteProtector System" on
page 37.
To change an existing Agent Manager, click OK, and then click Save Changes.
■
6. Reboot the appliance.
IBM Internet Security Systems