Monitoring Ad Hoc Discovery And Ad Hoc Assessment Scans - IBM Proventia Network Enterprise Scanner User Manual

Chapter 3: Running Your First Scans

Monitoring Ad Hoc Discovery and Ad Hoc Assessment Scans

Introduction
Procedure
50
Follow the procedure in this topic to monitor the ad hoc discovery and ad hoc assessment
scans.
To monitor the scans:
1. Right-click the group on the navigation pane, select Properties from the pop-up
menu, and then click Command Jobs on the navigation pane.
Or click the Control jobs icon
Tip:
The ad hoc discovery scan appears in the Command Jobs window, and the task name
appears under the Object column.
2. Click the Details-[Linked]First Ad Hoc Discovery tab.
The job-level statistics for the job appear.
Figure 7: Job-level statistics for an ad hoc discovery scan
[Linked] prepended to the task name indicates that the assessment scan was
Note:
set up to run after the discovery scan has finished. The same prefix is attached to the
assessment scan to indicate that it is linked with a discovery scan.
The status starts out as Pending, may go back-and-forth between Idle and
Tip:
Processing until it finishes, and then its status is Completed.
For more information about how scan jobs run and how to find information
Tip:
about them, see Chapter 10, "Monitoring Scans" on page 135.
on the toolbar.
IBM Internet Security Systems