IBM Proventia Network Enterprise Scanner User Manual page 39

IBM Proventia Network Enterprise Scanner User Guide, Version 1.3
You can define additional Agent Managers to use as backups. Arrange them in
Tip:
order of preference, with the most preferred first in the list.
9. If your agent must use a password to connect with the Agent Manager, click Enter
Password, and then type the password in the Password and Confirm Password
boxes.
10. If a proxy HTTPS server is installed on the network between the agent and the
SiteProtector system, select the Use Proxy Settings check box, and then configure the
proxy as follows:
Field
Proxy Server Address
Proxy Server Port
Proxy Username
Proxy Password
11. Click OK, and then click Save Changes.
The Authentication page appears.
12. Type the SiteProtector Account and Password for the SiteProtector Account that
allows you to access sensitive information, such as logon credentials for asset
accounts.
13. Click Save.
After the first heartbeat, your agent appears in the SiteProtector system in the group
you designated.
This operation may take several minutes. Wait until this page is refreshed in
Note:
your browser before you continue.
Registering Enterprise Scanner to Connect to the SiteProtector System
Description
The DNS name or the IP address of the proxy server.
The HTTPS port number of the proxy server.
If required, the user ID the agent needs to authenticate with the
proxy server.
The password that goes with the user ID if the agent needs one to
authenticate with the proxy server.
39