Removing An Agent From Siteprotector - IBM Proventia Network Enterprise Scanner User Manual

Chapter 15: Performing Routine Maintenance

Removing an Agent from SiteProtector

Introduction
Procedure
202
Follow the procedure in this topic to remove an agent from SiteProtector.
To remove an agent from SiteProtector:
1. In the SiteProtector Console, open a tab with an Agent view, and then select the group
that contains your agent.
2. On the right pane, right-click the agent, and then select Delete from the pop-up menu.
3. If you want to delete the group, right-click the group on the navigation pane, and then
select Delete from the pop-up menu.
Never delete a group that contains an agent unless you delete the agent
Important:
first. If you delete a group that contains an agent, the group is deleted, but the agent
goes into the Ungrouped Assets group.
4. Log on to the Proventia Manager for your agent. (See page 200.)
5. Select System on the navigation pane, and then click Management
It may take a while for Java to initialize the first time you do this.
Note:
6. Clear the Register With SiteProtector check box, and then click Save Changes.
The Authentication window appears and indicates that the agent is unregistered.
7. If you want to shut down the application and turn off the appliance, click
→
System Tools on the navigation pane, and then click SHUT DOWN.
The application shuts down and the appliance is turned off.
→
Registration.
IBM Internet Security Systems