IBM Proventia Network Enterprise Scanner User Manual page 49

IBM Proventia Network Enterprise Scanner User Guide, Version 1.3
10. Click Assessment on the left pane.
The Assessment policy appears.
The default settings run all the non-DoS (Denial of Service) checks.
Note:
Figure 6: Ad hoc assessment policy
Tip: If you want to see or change the checks that run, select the Checks tab. For
information about viewing checks, see "Grouping and Displaying Checks
(Assessment Policy)" on page 103.
If you want to see or change any common assessment settings, select the
Tip:
Common Settings tab. For information about changing common settings, see
"Defining Common Assessment Settings (Assessment Policy)" on page 106.
11. Click OK.
The system schedules an ad hoc discovery scan job in the Command Jobs window in
the SiteProtector system. The ad hoc assessment scan does not run until the ad hoc
discovery scan has finished.
Running Ad Hoc Scans
49