The Proventia Manager Home Page - IBM Proventia Network Enterprise Scanner User Manual

Chapter 17: Viewing Agent Status

The Proventia Manager Home Page

Introduction
Protection status
System status
232
The Proventia Manager Home page provides the following types of information about the
Enterprise Scanner agent:
protection status
●
system status
●
System status information is also available in the SiteProtector Console. (See page
Tip:
234.)
The status icon indicates the operational status of the agent as follows:
Icon Status
The component is active.
The component is stopped.
The component is in an unknown state.
Note: This status may require immediate attention.
Table 85: Protection status icons
On the Home page, the system status section describes the current status of the system as
follows:
System Status Information
Model Number
Serial Number
Network Interfaces
Base Version Number
Uptime
Last Restart
Table 86: System status icons
Description
The model number of the agent.
The serial number of your agent.
The number of interfaces on your agent.
The base version of the agent software, which is one of the
following:
• the base version is the software version shipped with the agent
• the software version of the most recent system backup.
The length of time that the agent has been online. The time is
given in the following format:
x days, x hours, x minutes
The time the agent was last restarted. The time is given in the
following format:
• yyyy-mm-dd
• hh:mm:ss
Example:
2004-05-04 16:24:37
IBM Internet Security Systems