Identifying Error Conditions - IBM Proventia Network Enterprise Scanner User Manual

Identifying Error Conditions

Introduction
Illustration
Messages
IBM Proventia Network Enterprise Scanner User Guide, Version 1.3
If a job does not scan as you expect it to, look for information in the Remote Scan window.
The messages may be informational messages or error messages.
Figure 41 is an example of the Remote Scan window showing a tree-view list of the
discovery job and tasks:
Figure 41: Remote Scan window showing the tree-view list of discovery tasks
The following messages may appear in the Remote Scan window:
Text of Message
Parent Adhoc Scan for (Group_Name) ERROR Reading Policy no scans
scheduled.
Parent Adhoc Scan for (Group_Name) IGNORED no scans Enabled.
Note: This means that neither Discovery nor Assessment is enabled in the Adhoc Scan Control
policy.
Group Group_Name: Stopping Discovery scans due to scan window
Group Group_Name: Stopping Assessment scans due to scan window
Group Group_Name: Stopping Discovery to refresh ScanControl
Group Group_Name: Stopping Assessment to refresh ScanControl
Group Group_Name: Stopping Discovery scan, disabled in ScanControl
Group Group_Name: Stopping Assessment scan, disabled in ScanControl
Group_Name no assets found - no scan tasks scheduled
Group_Name scan disabled, no scan being scheduled
No Discovery policy found for Group_Name. No scan being scheduled
No Assessment policy found for Group_Name. No scan being scheduled
Table 56: Messages in the Display Task Detail AA window
Identifying Error Conditions
161