Creating A New Profile - Cisco Aironet CB21AG Installation And Configuration Manual

Creating a New Profile

Creating a New Profile

Follow the steps below to create a new profile.
Perform one of the following:
Step 1
•
•
Figure 4-2
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
4-4
If you want to create a new profile from scratch, click New on the Cisco Aironet Desktop Utility
(Profile Management) window. Then go to
If you want to find an available network and create a profile based on it, click Scan on the Cisco
Aironet Desktop Utility (Profile Management) window. The Available Infrastructure and Ad Hoc
Networks window appears (see
Available Infrastructure and Ad Hoc Networks Window
This window displays a list of all available networks. Click the Refresh button when you want to
refresh the window and update the list of available networks.
The SSID of a Cisco IOS access point appears in the list of available networks only if a Guest
Note
Mode SSID is enabled or the Broadcast SSID in Beacon option is selected. Refer to the
software configuration guide for your access point for additional information.
Table 4-2 provides a description of the default fields on the Available Infrastructure and Ad Hoc
Networks window. If you want to be able to view additional fields, choose Scan List Settings from
the Options drop-down menu. The Configure Scan List Columns window appears (see
Step 4.
Figure 4-2).
Chapter 4 Using the Profile Manager
Figure
OL-4211-05
4-3).