NETGEAR ProSafe SRX5308 Reference Manual page 88

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 19. Inbound rules overview
Setting Description
Service The service or application to be covered by this rule. If the service or application does not
appear in the list, you need to define it using the Services screen (see
Services
Action The action for outgoing connections covered by this rule:
• BLOCK always
• BLOCK by schedule, otherwise allow
• ALLOW always
• ALLOW by schedule, otherwise block
Note:
rule.
Select Schedule The time schedule (that is, Schedule1, Schedule2, or Schedule3) that is used by this
rule.
• This drop-down list is activated only when BLOCK by schedule, otherwise allow or
ALLOW by schedule, otherwise block is selected as the Action.
• Use the schedule screen to configure the time schedules (see
or Allow Specific Traffic
Send to LAN Server The LAN server address determines which computer on your network is hosting this
service rule. (You can also translate this address to a port number.) The options are:
• Single address. Enter the required address in the Start field to apply the rule to a
single device on your LAN.
• Address range. Enter the required addresses in the Start and End fields to apply the
rule to a range of devices.
Send to DMZ Server The DMZ server address determines which computer on your network is hosting this
service rule. (You can also translate this address to a port number.)
Translate to Port You can enable this setting and specify a port number if you want to assign the LAN
Number server or DMZ server to a specific port.
WAN Destination IP The setting that determines the destination IP address applicable to incoming traffic.
Address
This is the public IP address that maps to the internal LAN server. This address can be
either the address of one of the WAN interfaces or another public IP address (when you
have a secondary WAN address configured).
You also have the option to enter an address range. Enter the required addresses in the
Start and End fields to apply the rule to a range of devices.
on page 112).
Any inbound traffic that is not blocked by rules you create is allowed by the default
on page 121).
Firewall Protection
88
Add Customized
Set a Schedule to Block