NETGEAR ProSafe SRX5308 Reference Manual page 96


To delete or disable one or more rules:
1. Select the check box to the left of the rule that you want to delete or disable, or click the
Select All table button to select all rules.
2. Click one of the following table buttons:
• Disable. Disables the rule or rules. The "!" status icon changes from a green circle to
a gray circle, indicating that the selected rule or rules are disabled. (By default, when
a rule is added to the table, it is automatically enabled.)
• Delete. Deletes the selected rule or rules.
DMZ WAN Outbound Services Rules
You can change the default outbound policy or define rules that specify exceptions to the
default outbound policy. By adding custom rules, you can block or allow access based on the
service or application, source or destination IP addresses, and time of day. An outbound rule
can block or allow traffic between the DMZ and any external WAN IP address according to
the schedule created in the Schedule screen.

To create a new outbound DMZ WAN service rule:
1. In the DMZ WAN Rules screen, click the Add table button under the Outbound Services
table. The Add DMZ WAN Outbound Service screen displays. (The following figure
shows an example.)
Figure 46.
2. Enter the settings as explained in
3. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 18
Firewall Protection
on page 84.
96