View The Vlan Status - NETGEAR ProSafe SRX5308 Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
The following table explains the fields of the Router Statistics screen:
Table 70. Router Statistics screen information
Item
System up Time: the period since the last time that the VPN firewall was started up.
Router Statistics
For each of the four WAN interfaces and for all LAN interfaces combined, the following statistics are
displayed:
Tx Pkts
Rx Pxts
Collisions
Tx B/s
Rx B/s
Up TIme
To change the poll interval period, enter a new value in the Poll Interval field, and then click
Set interval. To stop polling, click Stop.

View the VLAN Status

The VLAN Status screen displays information about the VLANs (both enabled and disabled)
that are configured on the VPN firewall. For information about configuring VLAN profiles, see
Configure a VLAN Profile
profiles, see Assign and Manage VLAN Profiles
Description
The number of transmitted packets on the port in bytes.
The number of received packets on the port in bytes.
The number of signal collisions that have occurred on the port. A collision occurs
when the port attempts to send data at the same time as a port on the other router or
computer that is connected to this port.
The number of transmitted bytes per second on the port.
The number of received bytes per second on the port.
The period that the port has been active since it was restarted.
on page 59. For information about enabling and disabling VLAN
Monitoring System Access and Performance
280
on page 57.