NETGEAR ProSafe SRX5308 Reference Manual page 45

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 24.
4. Access the website of the DDNS service provider and register for an account (for example,
for DynDNS.org, go to http://www.dyndns.com/).
5. Configure the DDNS service settings as explained in the following table:
Table 8. DDNS service settings
Setting Description
WAN1 (Dynamic DNS Status: ...)
Change DNS to Select the Yes radio button to enable the DDNS service. The fields that display on the
(DynDNS, TZO, screen depend on the DDNS service provider that you have selected. Enter the following
Oray, or 3322) settings:
Host and Domain Name
Username or
User Email Address
Password or User Key
Use wildcards
Update every 30 days
WAN2 (Dynamic DNS Status: ...)
WAN3 (Dynamic DNS Status: ...)
WAN4 (Dynamic DNS Status: ...)
See the information for WAN1 above about how to enter the settings. You can select different DDNS
services for different WAN interfaces.
6. Click Apply to save your configuration.
The host and domain name for the DDNS service.
The user name or email address for DDNS server
authentication.
The password that is used for DDNS server authentication.
If your DDNS provider allows the use of wildcards in resolving
your URL, you can select the Use wildcards check box to
activate this feature. For example, the wildcard feature
causes *.yourhost.dyndns.org to be aliased to the same IP
address as yourhost.dyndns.org.
If your WAN IP address does not change often, you might
need to force a periodic update to the DDNS service to
prevent your account from expiring. If it appears, you can
select the Update every 30 days check box to enable a
periodic update.
Connecting the VPN Firewall to the Internet
45