NETGEAR ProSafe SRX5308 Reference Manual page 27

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 2. Internet connection methods
Connection method Manual data input required
DHCP (Dynamic IP)
PPPoE
PPTP
Fixed (Static) IP
• If the auto detect process does not find a connection, you are prompted either to
check the physical connection between your VPN firewall and the cable or DSL line or
to check your VPN firewall's MAC address. For more information, see
WAN Mode on page 32 and
4. Verify the connection:
a. Return to the WAN screen by selecting Network Configuration > WAN Settings.
b. Click the Status button in the Action column of the WAN interface that you just
configured to display the Connection Status popup window:
Figure 12.
The WAN Status window should show a valid IP address and gateway. If the
configuration was not successful, skip ahead to
Connection on this page or see
Note: If the configuration process was successful, you are connected to
the Internet through the WAN interfaces that you just configured.
Continue with the configuration process for the other WAN
interfaces.
No data is required.
Login, Password, Account Name, Domain Name
Login, Password, Account Name, My IP Address, and Server IP Address.
IP Address, Subnet Mask, and Gateway IP Address; and related data supplied
by your ISP.
Troubleshoot the ISP Connection
Troubleshoot the ISP Connection
Connecting the VPN Firewall to the Internet
27
on page 296.
Manually Configure the Internet
on page 296.
Configure the