NETGEAR ProSafe SRX5308 Reference Manual page 113

2. In the Add Customer Service section of the screen, enter the settings as explained in the
following table:
Table 22. Services screen settings
Setting Description
Name A descriptive name of the service for identification and management purposes.
Type From the Type drop-down list, select the Layer 3 protocol that the service uses as its
transport protocol:
• TCP
• UDP
• ICMP
ICMP Type A numeric value that can range between 0 and 40. For a list of ICMP types, see
http://www.iana.org/assignments/icmp-parameters.
This field is enabled only when you select ICMP from the Type drop-down list.
Start Port The first TCP or UDP port of a range that the service uses.
This field is enabled only when you select TCP or UDP from the Type drop-down list.
Finish Port The first TCP or UDP port of a range that the service uses. If the service uses only a single
port number, enter the same number in the Start Port and Finish Port fields.
This field is enabled only when you select TCP or UDP from the Type drop-down list.
3. Click Apply to save your settings. The new custom service is added to the Custom Services
Table.

To edit a service:
1. In the Custom Services table, click the Edit table button to the right of the service that
you want to edit. The Edit Service screen displays.
Figure 60.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified service is displayed in the Custom Services
Table.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Firewall Protection
113