NETGEAR ProSafe SRX5308 Reference Manual page 133

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 73.
2. To enable the UPnP feature, select the Yes radio button. (The feature is disabled by default.)
To disable the feature, select No.
3. Configure the following fields:
- Advertisement Period. Enter the period in minutes that specifies how often the VPN
firewall should broadcast its UPnP information to all devices within its range. The
default setting is 40 minutes.
- Advertisement Time to Live. Enter a number that specifies how many steps (hops)
each UPnP packet is allowed to propagate before being discarded. Small values will
limit the UPnP broadcast range. The default setting is 4 hops.
4. Click Apply to save your settings.
To refresh the contents of the UPnP Portmap Table, click Refresh.
Firewall Protection
133