NETGEAR ProSafe SRX5308 Reference Manual page 278

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 69. Detailed Status screen information (continued)
Item
VLAN ID
MAC Address
IP Address
Subnet Mask
DHCP Status
WAN Info
The following fields are shown for each of the four WAN port.
WAN Mode
WAN State
NAT
Connection Type
Connection State
WAN Connection Type
Upload Connection
Speed
Download Connection
Speed
Monitoring System Access and Performance
Description
The VLAN ID that you assigned to this port on the Add VLAN Profile screen (see
Configure a VLAN Profile on page 59). If the default VLAN profile is used, the
VLAN ID is 1, which means that all tagged and untagged traffic can pass on this
port.
The MAC address of this port. All LAN ports share the same MAC address
(00:00:00:00:00:01). However, if LAN port 4 is enabled as the DMZ port, its MAC
address is changed to 00:00:00:00:00:06. For information about configuring the
DMZ port, see Configure and Enable the DMZ Port
The IP address for this port. If the VLAN is not enabled on this port, the IP
address is the default LAN IP address (192.168.1.1). For information about
configuring VLAN profiles, see
The subnet mask for this port. If the VLAN is not enabled on this port, the subnet
mask is the default LAN IP subnet mask (255.255.255.0). For information about
configuring VLAN profiles, see
The status can be either DHCP Enabled or DHCP Disabled. For information
about enabling DHCP for this port, see
The WAN mode can be Single Port, Load Balancing, or Auto Rollover. For
information about configuring the WAN mode, see
page 32.
The WAN state can be either UP or DOWN, depending on whether the port is
connected to the Internet and whether the port is enabled. For information about
connecting WAN ports, see
The NAT state can be either Enabled or Disabled, depending on whether NAT is
enabled (see Configure Network Address Translation
routing is enabled (see Configure Classical Routing
The connection type can be Static IP, DHCP, PPPoE, or PPTP, depending on
whether the WAN address is obtained dynamically through a DHCP server or
assigned statically by you. For information about connection types, see
Configure the Internet Connections
The connection state can be either Connected or Not Connected, depending on
whether the WAN port is physically connected to a modem or router. For
information about connecting a WAN port, see the ProSafe Gigabit Quad WAN
SSL VPN Firewall SRX5308 Installation Guide
The detected type of Internet connection that is used on this port. The WAN
connection type can be DSL, ADSL, CableModem, T1, or T3.
The maximum upload speed that is provided by your ISP.
The maximum download speed that is provided by your ISP.
278
on page 72.
Configure a VLAN Profile
Configure a VLAN Profile
Configure a VLAN Profile
Configure the WAN Mode
Configure the Internet Connections
on page 33) or classical
on page 33).
on page 24.
.
on page 59.
on page 59.
on page 59.
on
on page 24.