NETGEAR ProSafe SRX5308 Reference Manual page 268

5. Enter the settings as explained in the following table:
Table 66. Add LAN Traffic Meter Account screen settings
Setting
Add LAN Traffic Meter Account
LAN IP Address
Direction
Limit
Traffic Counter
Restart Traffic
Counter
Send e-mail report
before restarting
counter
When Limit is reached
Block Traffic
6. Click Apply to save your settings. The new account is added to the LAN Traffic Meter table
on the LAN Traffic Meter screen.

To view the LAN IP traffic meter statistics:
In the LAN Traffic Meter table, click the Edit table button to the right of the account for which
you want to view the statistics. The Edit LAN Traffic Meter Account screen displays. This
screen shows the same fields as the Add LAN Traffic Meter Account screen (see the previous
figure) together with the statistics at the bottom of the screen:
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
The LAN IP address for the account.
From the Direction drop-down list, select the direction in which traffic is measured:
• Inbound traffic. Restrictions are applied to incoming traffic when the traffic limit is
reached.
• Both directions. Restrictions are applied to both incoming and outgoing traffic
when the traffic limit is reached.
Enter the monthly traffic volume limit in MB. The default setting is 0 MB.
Select one of the following radio buttons to specify when the traffic counter restarts:
• Restart Traffic Counter Now. Select this option and click Apply at the bottom of
the screen to restart the traffic counter immediately.
• Restart Traffic Counter at a Specific Time. Restart the traffic counter at a
specific time and day of the month. Fill in the time fields and select the day of the
month from the drop-down list.
An email report is sent immediately before the counter restarts. Ensure that emailing
of logs is enabled on the Email and Syslog screen (see
Events, Alerts, and Syslogs
Select one of the following radio buttons to specify what action the VPN firewall
performs when the traffic limit has been reached:
• Block. All incoming and outgoing Internet and email traffic is blocked.
• Send Email Alert and Block. An email alert is sent when all incoming and
outgoing Internet and email traffic is blocked. Ensure that emailing of logs is
enabled on the Email and Syslog screen (see
Alerts, and Syslogs on page 269).
Monitoring System Access and Performance
on page 269).
Activate Notification of Events,
268
Activate Notification of