NETGEAR ProSafe SRX5308 Reference Manual page 225

Figure 138.
The List of Groups table displays the VPN groups with the following fields:
• Check box. Allows you to select the group in the table.
• Name. The name of the group. If the group name is appended by an asterisk, the
group was created by default when you created the domain with the identical name
as the default group. You cannot delete a default group; you can only delete the
domain with the identical name, which causes the default group to be deleted.
• Domain. The name of the domain to which the group is assigned.
• Action. The Edit table button that provides access to the Edit Group screen.
2. In the Add New Group section of the screen, enter the settings as explained in the following
table:
Table 57. Group screen settings
Setting
Name
Domain
Idle Timeout
3. Click the Add table button. The new group is added to the List of Groups table.

To delete one or more groups:
1. In the List of Groups table, select the check box to the left of the group that you want to
delete, or click the Select All table button to select all groups. You cannot delete a
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
A descriptive (alphanumeric) name of the group for identification and management
purposes.
The drop-down list shows the domains that are listed on the Domain screen. From the
drop-down list, select the domain with which the group is associated. For information
about how to configure domains, see
The period after which an idle user is automatically logged out of the VPN firewall's
web management interface. The default idle time-out period is 10 minutes.
Managing Users, Authentication, and Certificates
Configure Domains
225
on page 219.