NETGEAR ProSafe SRX5308 Reference Manual page 257


To display the Settings Backup and Firmware Upgrade screen:
Select Administration > Settings Backup and Firmware Upgrade.
Figure 157.
Back Up Settings
The backup feature saves all VPN firewall settings to a file. These settings include the IP
addresses, subnet masks, gateway addresses, and so on.
Back up your VPN firewall settings periodically, and store the backup file in a safe place.
Tip: You can use a backup file to export all settings to another VPN firewall
that has the same language and management software versions.
Remember to change the IP address of the second VPN firewall before
deploying it to eliminate IP address conflicts on the network.

To back up settings:
1. On the Settings Backup and Firmware Upgrade screen (see the previous screen), next
to Save a copy of current settings, click the Back Up button to save a copy of your
current settings. A warning appears, and then a screen, showing the file name of the
backup file (SRX5308.cfg).
2. Select Save file, and then click OK.
3. Open the folder where you have saved the backup file, and then verify that it has been
saved successfully.
Note the following:
• If your browser is not configured to save downloaded files automatically, locate the folder
in which you want to save the file, specify the file name, and save the file.
• If your browser is configured to save downloaded files automatically, the file is saved to
your browser's download location on the hard disk.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Network and System Management
257