NETGEAR ProSafe SRX5308 Reference Manual page 93

LAN WAN Outbound Services Rules
You can define rules that specify exceptions to the default rules. By adding custom rules, you
can block or allow access based on the service or application, source or destination IP
addresses, and time of day. An outbound rule can block or allow traffic between an internal IP
LAN address and any external WAN IP address according to the schedule created in the
Schedule screen.
You can also tailor these rules to your specific needs (see
Note: This feature is for advanced administrators only! Incorrect
configuration might cause serious problems.

To create a new outbound LAN WAN service rule:
1. In the LAN WAN Rules screen, click the Add table button under the Outbound Services
table. The Add LAN WAN Outbound Service screen displays. (The following figure
shows an example.)
Figure 43.
2. Enter the settings as explained in
3. Click Apply to save your changes. The new rule is now added to the Outbound Services
table.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 18
Firewall Protection
Administrator Tips
on page 84.
93
on page 82).