NETGEAR ProSafe SRX5308 Reference Manual page 143

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 83.
Note: When using FQDNs, if the dynamic DNS service is slow to update
its servers when your DHCP WAN address changes, the VPN tunnel
will fail because the FQDNs do not resolve to your new address. If
you have the option to configure the update interval, set it to an
appropriately short time.
4. Optional step: Collect the information that you need to configure the VPN client. You can
print the following table to help you keep track of this information.
Table 31. Information required to configure the VPN client
Component
Pre-Shared Key
Remote Identifier Information
Local Identifier Information
Router's LAN Network IP Address 192.168.1.0
Router's LAN Network Mask
Router's WAN IP Address
Use the NETGEAR VPN Client Wizard to Create a Secure Connection
The VPN client lets you to set up the VPN connection manually (see
Secure Connection Using the NETGEAR VPN Client
Configuration Wizard, which is the easier and preferred method. The Configuration Wizard
configures the default settings and provides basic interoperability so that the VPN client can
easily communicate with the VPN firewall (or third-party VPN devices). The Configuration
Wizard does not let you enter the local and remote IDs, so you need to manually enter this
information.
Virtual Private Networking Using IPSec Connections
Example Information to be collected
I7!KL39dFG_8
srx_remote.com
srx_local.com
255.255.255.0
10.34.116.22
on page 148) or with the integrated
143
Manually Create a