NETGEAR ProSafe SRX5308 Reference Manual page 286

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 175.
The Connection Status screen displays the information that is described in the following
table. The information that is shown on the Connection Status screen depends on the
nature of the connection—static IP address or dynamically assigned IP address.
Therefore, not all information that is described in the following table might be shown.
Table 74. WAN port Connection Status screen information
Item Description
Connection Time The period that the VPN firewall has been connected through the WAN port.
Connection Type The connection type can be either DHCP or Static IP.
Connection Status The connection status can be either Connected or Disconnected.
IP Address
The addresses that were automatically detected (see
Subnet Mask
Connecting
screen (see
Gateway
DNS Server
DHCP Server The DHCP server that was automatically detected. This field is displayed only when
your ISP does not require a login and the IP address is acquired dynamically from
your ISP. You have configured these settings on the WAN ISP Settings screen (see
Manually Configure the Internet Connection
Lease Obtained The time when the DHCP lease was obtained.
Lease Duration The period that the DHCP lease remains in effect.
Depending on the type of connection, any of the following buttons might be displayed on
the Connection Status screen:
• Renew. Click to renew the DHCP lease.
• Release. Click to disconnect the DHCP connection.
• Disconnect. Click to disconnect the static IP connection.
Monitoring System Access and Performance
on page 25) or that you have configured on the WAN ISP Settings
Manually Configure the Internet Connection
286
Automatically Detecting and
on page 28).
on page 28).