NETGEAR ProSafe SRX5308 Reference Manual page 50


To add a priority QoS profile:
1. Select Network Configuration > QoS. The QoS screen displays.
2. Under the List of QoS Profiles table, click the Add table button. The Add QoS screen
displays. The following figure shows settings for a priority QoS profile:
Figure 27.
3. Enter the settings as explained in the following table:
Table 10. Add QoS screen settings for a priority profile
Setting
QoS Type
Interface
Service
Direction
Diffserv QoS Match
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
Priority (for Rate Control, see
From the drop-down list, select one of the WAN interfaces.
From the drop-down list, select a service or application to be covered by this
profile. If the service or application does not appear in the list, you need to
define it using the Services screen (see
From the drop-down list, select the direction to which the priority queue is
applied:
• Outbound Traffic. The priority queue is applied to outbound traffic only.
• Inbound Traffic. The priority queue is applied to inbound traffic only.
Enter a DSCP value in the range of 0 through 63. Packets are classified against
this value. Leave this field blank to disable packet matching.
Connecting the VPN Firewall to the Internet
Figure 26 on page 48 and
Services-Based Rules
50
Table 9 on page 48)
on page 83).