NETGEAR ProSafe SRX5308 Reference Manual page 228

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Click the Add table button. The Add User screen displays:
Figure 141.
3. Enter the settings as explained in the following table:
Table 58. Add User screen settings
Setting Description
User Name A descriptive (alphanumeric) name of the user for identification and management
purposes.
User Type From the drop-down list, select one of the predefined user types that determines the
access credentials:
• Administrator. User who has full access and the capacity to change the VPN
• SSL VPN User. User who can only log in to the SSL VPN portal.
• IPSEC VPN User. User who can only make an IPSec VPN connection via a
• Guest User. User who can only view the VPN firewall configuration (that is,
Select Group The drop-down list shows the groups that are listed on the Group screen. From the
drop-down list, select the group to which the user is assigned. For information about
how to configure groups, see
Note:
selected group.
Password The password that the user needs to enter to gain access to the VPN firewall. The
password can contain alphanumeric, "—" or "_" characters.
Confirm Password The password in this field needs to be identical to the one in the Password field.
Idle Timeout The period after which an idle user is automatically logged out of the web management
interface. The default idle time-out period is 10 minutes.
4. Click Apply to save your settings. The user is added to the List of Users table.
firewall configuration (that is, read/write access).
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled (see
Configure Extended Authentication (XAUTH)
read-only access).
The user is automatically assigned to the domain that is associated with the
Managing Users, Authentication, and Certificates
228
on page 172).
Configure Groups for VPN Policies on page 224.