NETGEAR ProSafe SRX5308 Reference Manual page 40

Table 7. Add Protocol Binding screen settings (continued)
Setting
Destination
Network
5. Click Apply to save your settings. The protocol binding rule is added to the Protocol Binding
table. The rule is automatically enabled, which is indicated by the "!" status icon that displays
a green circle.

To edit a protocol binding:
1. On the Protocol Bindings screen (see
table, click the Edit table button to the right of the binding that you want to edit. The Edit
Protocol Bindings screen displays. This screen shows the same fields as the Add Protocol
Bindings screen (see the previous figure).
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.

To enable, disable, or delete one or more protocol bindings:
1. On the Protocol Bindings screen (see
left of the protocol binding that you want to enable, disable, or delete, or click the Select
All table button to select all bindings.
2. Click one of the following table buttons:
• Enable. Enables the binding or bindings. The "!" status icon changes from a gray
circle to a green circle, indicating that the selected binding or bindings are enabled.
(By default, when a binding is added to the table, it is automatically enabled.)
• Disable. Disables the binding or bindings. The "!" status icon changes from a green
circle to a gray circle, indicating that the selected binding or bindings are disabled.
• Delete. Deletes the binding or bindings.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
The destination network settings determine which Internet locations (based on their IP
address) are covered by the rule. Select one of the following options from the drop-down
list:
Any All Internet IP address.
Single address In the Start IP field, enter the IP address to which the rule is applied.
Address range In the Start IP field and End IP field, enter the IP addresses for the
range to which the rule is applied.
Group If this option is selected, the rule is applied to the selected IP (WAN)
group.
Note:
page 114.).
Connecting the VPN Firewall to the Internet
For information about IP groups, see
Figure 20 on page 38), in the Protocol Bindings
Figure 20 on page 38), select the check box to the
40
Create IP Groups on