NETGEAR ProSafe SRX5308 Reference Manual page 147

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
c. Specify the settings that are explained in the following table.
Table 32. VPN client advanced authentication settings
Setting
Advanced features
Aggressive Mode
NAT-T
Local and Remote ID
Local ID
Remote ID
7. Configure the global parameters:
a. Click Global Parameters in the left column
Global Parameters pane displays in the
Virtual Private Networking Using IPSec Connections
Description
Select this check box to enable aggressive mode as the negotiation mode
with the VPN firewall.
Select Automatic from the drop-down list to enable the VPN client and VPN
firewall to negotiate NAT-T.
As the type of ID, select DNS from the Local ID drop-down list because you
specified FQDN in the VPN firewall configuration.
As the value of the ID, enter srx_remote.com as the local ID for the VPN
client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client. It
might be less confusing to configure an FQDN such as client.com as the
remote ID on the VPN firewall and then enter client.com as the local ID on
the VPN client.
As the type of ID, select DNS from the Remote ID drop-down list because
you specified an FQDN in the VPN firewall configuration.
As the value of the ID, enter srx_local.com as the remote ID for the VPN
firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client. It
might be less confusing to configure an FQDN such as router.com as the
local ID on the VPN firewall and then enter router.com as the remote ID on
the VPN client.
Configuration Panel screen.
147
of the Configuration Panel screen. The