Multi-SP function
This parameter specifies the number of set points (SP) when using the multi-SP func-
tion. When set to "0", the multi-SP function cannot be used.
Function
Setting Range
Comment
F Related article
4.3 How to Use Option Functions (4-7)
F Related parameter
See
"Event input assignment 1" (option mode)
F Option unit
Event input unit (E53-CKB)
Model
Event input assignment 1
This parameter specifies event input other than the multi-SP function. The following
two functions can be specified:
Run/Stop and Manual/Auto.
Function
Event input is disabled while the menu is displayed.
It is also disabled in set up, expantion, option and calibration modes.
Symbol
Comment
F Related article
4.3 How to Use Option Functions (page 4-7)
F Related parameter
See
"Event input assignment 1" (option mode)
F Option unit
Event input unit (E53-CKB)
Model
Unit
0 to 1
None
Function
Run/Stop
Manual/Auto
Conditions of Use
The event input function must be in use.
Default
0
Conditions of Use
Event input must be specified when the
event input function is in use.
Event Input Operation
ON: Stop,
OFF : Run
ON: Manual,
OFF : Auto
Option Mode
5--33