Group P: Option/Applied Function Parameters - Omron MX2 Series User Manual

4-3-5

Group P: Option/Applied Function Parameters

Parameter
Function name
No.
Operation Selection
P001
on Option Error
Pulse Train Input
P003
RP Selection
Pulse Train Input
P004
Type Selection
Number of Encoder
P011
Pulses
Simple Position
P012
Control Selection
Creep Speed Mov-
P014
*2
ing Amount
P015 Creep Speed Setting
Positioning Comple-
P017
tion Range Setting
Overspeed Error
P026
Detection Level
Speed Deviation
P027
Excessive Level
Acceleration/
P031 Deceleration Time
Input Type
Torque Reference
P033
Input Selection
Torque Reference
P034
Setting
Torque Bias Selec-
P036
tion
P037 Torque Bias Value
Torque Bias Polar-
P038
ity Selection
Speed Limit Value
P039 in Torque Control
(Forward)
Speed Limit Value
P040 in Torque Control
(Reverse)
Speed/Torque
P041
Switching Time
*1. The 3G3MX2-V1 Series Inverter does not provide the high-frequency mode.
*2. These parameters are newly added to the 3G3MX2-V1 Series.
Multi-function Compact Inverter 3G3MX2-V1 User's Manual (I585-E1)
Monitor or data range
00: Trip
01: Continue operation
00: Frequency setting (including PID)
01: Feedback pulse (enabled only
when 1st control is selected)
02: MI8 (General-purpose input 8 for
DriveProgramming)
00: Single-phase pulse train
01: Phase A and B 90°phase differ-
ence pulse train
02: Do not set.
03: Single-phase pulse train + direction
32. to 1024.
00: Simple position control disabled
02: Simple position control enabled
0.0 to 400.0
Starting Frequency to 10.00
0. to 9999.
*2
1000 (10000)
0.0 to 150.0
0.00 to 99.99
100.0 to 120.0
00: Digital Operator
03: DriveProgramming
00: Terminal FV
01: Terminal FI
03: Digital Operator
06: Option (No applicable Option)
0. to 200.
00: Disabled
01: Digital Operator
05: Option (No applicable Option)
−200. to 200.
00: As per sign
01: Dependent on RUN direction
0.00 to 99.99
100.0 to 120.0
0.00 to 99.99
100.0 to 120.0
0. to 1000.
Default Set
data data
00 Disabled
00 Disabled
00 Disabled
512. Disabled
00 Disabled
125.0 Disabled
*1
5.00 Disabled
50. Disabled
115.0 Disabled
10.00 Disabled
00 Disabled
00 Disabled
0.
00 Disabled
0.
00 Disabled
0.00 Disabled
0.00 Disabled
0. Disabled
4 Parameter List
Setting Changes
during during Unit Page
RUN RUN
−
Enabled P. 7-101
P. 6-18
−
Disabled
P. 7-52
−
Disabled
P. 6-18
P. 6-28
Disabled pulse
−
Disabled
P. 6-34
Disabled % P. 6-49
Enabled Hz
Disabled pulse P. 6-45
Enabled %
P. 6-23
Enabled Hz
−
Disabled P. 5-33
−
Disabled
P. 6-16
Enabled Enabled %
−
Disabled
P. 6-17
Enabled Enabled %
−
Disabled
Disabled Hz
P. 6-16
Disabled Hz
Disabled ms
4
4 - 35