Parameter Copy And Verify Function; Parameters For The Parameter Copy And Verify Function - Omron SYSDRIVE 3G3JV User Manual

Preparing for Operation and Monitoring
3-2

Parameter Copy and Verify Function

The 3G3IV-PJVOP140 and 3G3IV-PJVOP146 Digital Operators include EEPROM
memory. All the parameters for the Inverter, the Inverter capacity, and the software ver-
sion are saved in this memory. If the memory is used, the parameter settings for the
Inverter can be copied to other Inverters.
Note: Copying can be performed between Inverters with the same power supply speci-
fications. Some parameters, however, may not be copied.

3-2-1 Parameters for the Parameter Copy and Verify Function

The following table shows the parameters used when reading, copying (i.e., writing), and verifying pa-
rameters.
Parameter Register
No. No.
n76 014C
3-10
Name Description
Paramet Selects the function for
er Copy copying parameters.
and
Rdy: Ready to accept the
Verify
next command.
Function
Red: Read the Inverter
parameters.
Cpy: Copy the parameters
to the Inverter.
VFy: Verify the Inverter
parameters.
Va: Verify the Inverter
capacity display.
Sno: Verify the software
number.
Setting Setting Default
range unit setting
rdy to --- rdy
Sno
Chapter 3
Writing
during
operation