Regenerative Braking Load Rate Monitor [D103]; Electronic Thermal Load Rate Monitor [D104]; Analog Voltage Input Fv Monitor [D130]; Analog Current Input Fi Monitor [D131] - Omron MX2 Series User Manual

7 Other Functions

7-1-31 Regenerative Braking Load Rate Monitor [d103]

Use this function to display the regenerative braking load rate. If this monitor value exceeds the value
set in the Usage Rate of Regenerative Braking (b090), the inverter will trip with the alarm code E06
(Braking resistor overload protection).
Parameter
No.
Regenerative Braking
d103
Load Rate Monitor
Related functions

7-1-32 Electronic Thermal Load Rate Monitor [d104]

Use this function to display the electronic thermal load rate. If this monitor value exceeds 100%, the
inverter will trip with the alarm code E05 (Overload protection).
The value will be reset to 0 when the power supply is shut off. The value will be reset to 0 also if it was
not be incremented for 10 minutes.
Parameter
No.
Electronic Thermal Load Rate
d104
Monitor

7-1-33 Analog Voltage Input FV Monitor [d130]

Use this function to monitor the state of the analog voltage that is input to the analog voltage reference
terminal FV for frequency reference input.
It displays the maximum input value for the terminal FV (equivalent to 10.9 V) as 1023 bits.
Parameter
No.
d130 Analog Voltage Input FV Monitor

7-1-34 Analog Current Input FI Monitor [d131]

Use this function to monitor the state of the analog current that is input to the analog current reference
terminal FI for frequency reference input.
It displays the maximum input value for the terminal FI (equivalent to 23.3 mA) as 1023 bits.
Parameter
No.
d131 Analog Current Input FI Monitor
7 - 16
Function name
0.0 to 100.0
b090
Function name
Function name
Function name
Data
Data
0.0 to 100.0
Data
0 to 1023
Data
0 to 1023
Multi-function Compact Inverter 3G3MX2-V1 User's Manual (I585-E1)
Default
Unit
data
−
%
Default
Unit
data
−
%
Default
Unit
data
−
bit
Default
Unit
data
−
bit