Multi-Function Output Monitor [D006]; Output Frequency Monitor (After Conversion) [D007] - Omron MX2 Series User Manual

7 Other Functions
7-1-6

Multi-function Output Monitor [d006]

Use this function to display the output status of each multi-function output terminal, based on whether
the corresponding 7-segment LED is lit or not lit.
Each LED shows the output status detected by the built-in CPU. Note that this is independent of the
NO/NC contact setting for each multi-function output terminal.
(Example) Multi-function output terminals P2 and P1
Relay output terminal MA
7-1-7

Output Frequency Monitor (After Conversion) [d007]

Use this function to display the output frequency value that is converted based on the Frequency Con-
version Coefficient (b086).
This parameter is useful when you want to view the output frequency in a different display unit, for
example, to monitor the motor rotation speed.
d007 = Output Frequency Monitor (d001) × Frequency Conversion Coefficient (b086)
(Example) To monitor the rotation speed of a 4-pole motor:
Therefore, if b086 = 30.0, then, at 60 Hz, the value of this parameter is 60 × 30.0 = 1800.
Parameter
No.
Output Frequency
d007 Monitor (After
Conversion)
Frequency Conversion
b086
Coefficient
d001/d007 Data
b163
Setting Selection
7 - 6
Display
ON
OFF
MA P2 P1
(OFF)(ON) (ON)
Motor rotation speed N [min−1] = (120 × f [Hz]) / P [pole] = f [Hz] × 30
Function name
0.00 to 99.99 (Displayed in increments of 0.01)
100.0 to 999.9 (Displayed in increments of 0.1)
1000. to 9999. (Displayed in increments of 1)
1000 to 4000 (Displayed in increments of 10)
0.01 to 99.99
Set in increments of 0.01
(d007 = d001 × b086)
00: Disabled
(Frequency cannot be changed in
d001/d007)
01: Enabled
(Frequency can be changed in
d001/d007)
: ON
: OFF
: Lit
: Not lit
Data
Multi-function Compact Inverter 3G3MX2-V1 User's Manual (I585-E1)
Default
Unit
data
− −
−
1.00
−
00