Polycom RMX 1500 Getting Started Manual page 98

Chapter 3-Basic Operation
3-18
Table 3-2 New Conference – General Options (Continued)
Field
ID
Conference
Password
Description
Enter the unique-per-MCU conference ID. If left
blank, the MCU automatically assigns a number
once the conference is launched.
This ID must be communicated to conference
participants to enable them to dial in to the
conference.
Enter a password to be used by participants to
access the conference. If left blank, no password is
assigned to the conference.
This password is valid only in conferences that are
configured to prompt for a conference password.
This field is numeric and has a default length of 4
characters. The administrator can modify it in the
Setup - System Configuration settings. For more
information, see the RMX 1500/2000/4000
Administrator's Guide, "System Configuration" on
page 19-5.
The RMX can be configured to automatically
generate conference (and chairperson) passwords
when these fields are left blank. For more
information, see the RMX 1500/2000/4000
Administrator's Guide, "Automatic Password
Generation Flags" on page 19-45.