Polycom RMX 1500 Getting Started Manual page 38
Multipoint control unit
Hide thumbs
Also See for RMX 1500:
- Administrator's manual (1118 pages) ,
- Getting started manual (160 pages) ,
- Hardware manual (34 pages)
Table of Contents
Advertisement
Chapter 2-First Time Installation and Configuration
2-8
4
Remove the boxes and top Stratocell® and open the anti-static plastic
bag wrapping the RMX.
5
Holding the handle on each side, lift the RMX 4000 from the box, and
place it on a flat surface or in a rack. Remove any packaging material
prior to positioning the RMX 4000.
Attention:
Two people are required to lift the MCU out of the box and when installing it in a
rack.
Write down the RMX's serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
Advertisement
Table of Contents
