Connecting Cables To The Rmx 1500 - Polycom RMX 1500 Getting Started Manual

Chapter 2-First Time Installation and Configuration
2-14

Connecting Cables to the RMX 1500

To connect the cables:
• For the RTM IP 1500 module:
— Connect the Media cable to LAN 2 port.
— Connect the Network cables to the MNG (Signaling) port &
MNGB (Management Network) port.
— (Optional) Connect the Shelf Management cable to the Shelf port.
• For the RTM ISDN 1500 module:
— Connect the E1/T1 cables to their PRI (1-4) ports.
Power Cable
Figure 2-1 RMX 1500 Rear Panel View with AC Power and Communication
Cables
The LAN 1, LAN3, LAN4 and Modem ports are not be used and the plastic caps
covering those ports should not be removed.
E1/T1 PRI LAN 2 - media; MNG - signaling;
Connection(s)
MNG B - management & Shelf