Polycom RMX 1500 Getting Started Manual page 68

Chapter 2-First Time Installation and Configuration
2-38
21 Define the following parameters:
Table 2-12 Fast Configuration Wizard – Spans Definition
Field
Framing
Side
Line Coding
Switch Type
22 Click Next.
Description
Select the Framing format used by the carrier for
the network interface from the list.
•
For T1 spans, default is SFSF.
•
For E1 spans, default is FEBE.
Select one of the following options:
•
User side (default)
•
Network side
•
Symmetric side
Note: If the PBX is configured on the network side,
then the RMX unit must be configured as the user
side, and vice versa, or both must be configured
symmetrically.
Select the PRI line coding method from the list.
•
For T1 spans, default is B8ZS.
•
For E1 spans, default is HDB3.
Select the brand and revision level of switch
equipment installed in the service provider's central
office.
•
For T1 spans, default is AT&T 4ESS.
•
For E1 spans, default is EURO ISDN.