Pcm Main Menu - Level 1; Click&View; Invite Participant - Polycom RMX 1500 Getting Started Manual

PCM Main Menu - Level 1

DTMF codes are entered using the Remote Device Numerics Keys and are
defined as follows:
Table 3-12 PCM - DTMF Codes
Numeric Key
0
1-9
*
#
Click&View
With the Click&View application, participants can change their
Layouts using the Arrow Keys or DTMF codes entered using the Numeric
Keys of their endpoints.
For a full description of Click&View see "Personal Layout Selection with
Click&View" on page 3-82.

Invite Participant

This function is not available to chairpersons using PCM with ISDN
endpoints.
Polycom RMX 1500/2000/4000 Getting Started Guide
Description
•
Number input.
•
Shortcut key to a numbered menu option - when
conference video or the PCM menu is displayed.
•
Return to the conference - when in FECC mode.
•
Number input.
•
Shortcut key to a numbered menu option - when the
conference video or the PCM menu is displayed.
•
Initiate PCM session on ISDN/PSTN endpoint (1 is the
default for the Start PCM DTMF Code).
•
Initiate DTMF mode (with Polycom endpoints) - during
a conference or when the PCM menu is displayed.
•
Enter a period "." - while entering an IP address.
Confirm selection and send information to the RMX.
Personal
3-95