Personal Layout Selection With Click&View - Polycom RMX 1500 Getting Started Manual

Chapter 3-Basic Operation
3-82
To cancel the Personal Video Forcing for a window without returning to
the conference layout:
1
In the Participant Properties – Media Sources dialog box, in the video
layout window, select Auto in the Participants list.
2 Click OK.
Switching between participants is renewed and is audio activated.
Personal Layout Selection with Click&View
With the Click&View application, participants can change their
Layouts via DTMF codes entered from their endpoints. Participants cannot
change their Personal Layouts when Lecture Mode is enabled.
This option is available only if the Click&View option is selected in the
Conference IVR Service. For more information see the RMX 1500/2000/4000
Administrator's Guide, "Defining a New Conference IVR Service" on
page 15-9.
To change Personal Layout with Click&View:
1
Enable Click&View – on the endpoint's keypad, enter
The Click&View application is displayed on the screen.
When using a Polycom VSX endpoint, an additional
enable the remote DTMF keypad. The full Click&View entry sequence is:
.
The Personal Layout keypad options menu is displayed on the video
screen.
Personal
.
must be entered to
,