Polycom RMX 1500 Getting Started Manual page 188

Multipoint control unit
Hide thumbs Also See for RMX 1500:
Table of Contents

Advertisement

Appendix A-Glossary
A-2
Abbreviation/
Explanation
Term
BRI
Basic Rate Interface. A type of ISDN connection for
transiting data, consisting of 3 channels: two B-channels
(each of 64 Kbps) and one D-channel (16 Kbps).
Carrier
A telephone or other company that provides
telecommunication transmission services.
CIF, 4CIF, QCIF
Common Intermediate Format, an optional part of the
ITU-T's H.261 and H.263 standards. CIF specifies 288
non-interlaced luminance lines, that contain 176 pixels.
CIF can be sent at frame rates of 7.5, 10, 15, or 30 per
second. When operating with CIF, the amount of data to
transmit cannot exceed 256 K bits (where K equals
1024).The CIF video format has the capacity to transmit
video images of 352x288 pixels at 36.45 Mbps and 30
frames per second. A 4CIF format has four times the
capacity of CIF; QCIF has quarter the capacity of CIF.
Codec
Coder-decoder. A device that converts voice and video
into digital code, and vice versa. Refers to the endpoint
video camera and video board that are used for
videoconferencing.
Conference
Connection between two or more endpoints exchanging
video and audio information. If only two endpoints are
involved, a conference is called point-to-point and no
MCU is required. If more than two endpoints are involved,
it is called a multipoint conference, and an MCU
(Multipoint Control Unit) is required as the management
system. For more information, see MCU.
CSU
Channel Service Unit. Customer-provided equipment that
is used as an interface between a communication network
and the data terminal.
DBA
Dynamic Bandwidth Allocation. Used to allocate the
bandwidth needed to transmit the additional packets. for
LPR.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmx 4000Rmx 2000

Table of Contents